Sprocket Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1
Users Guide
Document: CTIM-00152
Revision: 0.10
Page 15 of 22
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019/04/01
Power Input
The Sprocket Carrier accepts a single power input to power all on-board devices. A power input range of +12V
to +16V is acceptable, while a 12V input is nominal for operation.
WARNING: Please do not attempt to plug in the NVIDIA’s Development kit power supply which is 19.5V.
Doing this will damage the carrier board.
Function
Power
Location
P4
Type
Molex PicoBlade (4 pin) Right Angle Surface
Mount
P/N
53261-0471
Mating
51021-0400
Manufacturer: Molex
Crimp: 0500798100
Manufacturer: Molex
Cable
CBG252
OR
MSG069 (North America)
OR
MSG073 (Multi-region)
Pinout
Pin
Description
1-2
+VIN (12V to 16V DC)
3-4
GND
Notes
Below is the breakdown of MSG069 and
MSG073
MSG069: Wall mount kit (NA) for Sprocket
First part is CUI power supply: SWI24-12-N-P5
–
North American Plug.
Second part is a custom cable that will connect to
this power supply on one end and to Sprocket at
the other end.
MSG073: Wall mount kit (Multi-region) for
Sprocket:
First part is CUI power supply: SMI24-12-V-P5
–
Plug with Multi-region blades (see image on
right).
Second part is a custom cable that will connect to
CUI power supply on one end and to Sprocket at
the other end.
SMI24-12-V-P5 (image for reference only; see
product specs at Manufacturer website)
