Spacely Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1
Users Guide
Document: CTIM-00153
Revision: 0.19
Page 28 of 31
Date: 2020-11-04
SOFTWARE/BSP DETAILS
All Connect Tech NVIDIA Jetson TX2/TX2i/TX1 based products are built upon a modified Linux for Tegra
(L4T) Device Tree that is specific to each CTI product.
WARNING:
The hardware configurations of CTI’s products differ from that of the NVIDIA supplied
evaluation kit. Please review the product documentation and install ONLY the appropriate CTI L4T BSPs.
Failure to follow this process could result in non-functional hardware.
Connect Tech’s Custom L4T BSP (CTI-L4T)
Connect Tech also offers a custom BSP to add in additional peripheral support on CTI’s Jetson Carrier
Boards. In the case of the Spacely Carrier Board the CTI-L4T will expose software control of most of the
carrier interfaces including GPIO, MIPI CSI-2, CAN, 2x USB3.0, Mini-PCIe and more.
The CTI-L4T can be downloaded directly from Connect Tech here:
https://www.connecttech.com/jetson
NVIDIA Jetpack for L4T
The JetPack for L4T is an on-demand all-in-one package that bundles and installs all software tools
required to develop for the NVIDIA’s TX2i/TX2i/TX1 Platform with Connect Tech’s Carrier Boards.
JetPack includes host and target development tools, APIs and packages (OS images, tools, APIs,
middleware, samples, documentation including compiling samples) to enable developers to jump start
their development environment for developing with the Jetson Embedded Platform. The latest release
of JetPack runs on an Ubuntu 14.04 Linux 64-bit host system and supports both the latest Jetson
TX2/TX2i/TX1 Development Kit and Jetson TK1 Development Kit.
NVIDIA’s JetPack can be downloaded directly from NVIDIA here:
https://developer.nvidia.com/embedded/jetpack
