Connect Tech - COM Express Type-6 PMC/XMC Carrier Board - User Manual
Revision 0.03
26
Selection between mSATA and miniPCIe is done on the jumper block (J6)
Position
Jumper ON
Jumper OFF
J6A
Slot-0 miniPCIe selected
Slot-0 mSATA selected
J6B
Slot-1 miniPCIe selected
Slot-1 mSATA selected
** Note: This is opposite to the logic labeled on the PCB silk screen of REV A PCB’s **
Half and Full Length mini PCIe / mSATA module Installation
The
COM Express Type-6 PMC/XMC Carrier
’s miniPCIe / mSATA slots are designed for easy ruggedized
selection between full and half-length modules. This is done via the installation of M2.5 threaded
standoffs. Standoffs and screws are provided with the shipping configuration of the carrier board. Below
are some examples of how the various modules sizes can be installed.
All Half Length Modules
Installed
3 Full Length Modules
Configuration “A”
3 Full Length Modules
Configuration “B”
Standoff and Screw Assembly Diagram