Connect One II-EVB-630W Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

Connect One II-EVB-630W Скачать руководство пользователя страница 9

II-EVB-630W User Manual

Getting

Started

Getting Started

9

2 Getting

Started

This section describes the contents of the II-EVB-630W package, provides additional
relevant documentation to enhance and fine-tune the II-EVB-630W functionality, and
includes unpacking and first-time configuration instructions. The final section of this
chapter offers several ways to test the II-EVB-630W LAN connection.

2.1

What’s in the Package?

The II-EVB-630W is a turnkey boxed solution and, as such, is supplied with all
necessary accessories. The package includes the following items:

•

II-EVB-600W motherboard

•

WiFi 802.11b/g daughterboard (

BRD-IIDB-W2SW1)

•

RS232 male/female cable

•

RJ45 Cat 5 100BaseT cable

•

RJ11 Phone Cable

•

USB A to B Cable

•

110V or 220V power supply

•

Two extra iChips CO2128SEC

2.2 Additional

Documentation

The II-EVB-630W is built around the iChip CO2128SEC. Great flexibility in
configuration and operation of this product can be achieved via proper use of the
AT+i commands.

The release package includes documentation about the AT+i Protocol, including the
AT+i Programmer's Manual.

For the sake of simplicity, the II-EVB-630W configuration and operation is described
in this document mainly through the iChipConfig Utility.

The release package contains the iChipConfig Utility and the iChipConfig Utility User
Manual.

Note: Because documentation, utilities and firmware files change from time to time,
be sure to check for the latest version on Connect One’s website:

http://www.connectone.com

.

«
...
7
8
9
10
11
...
»

Содержание II-EVB-630W









































Отзывы:

Нет отзывов