Copyright
©
2016
congatec
AG
ICSLm13.indd
71/95
Feature
Options
Description
TPM Device Selection
dTPM 1.2
PTT
Select TPM device:
‘PTT’ - Enables PTT and disables dTPM in SkuMgr.
‘dTPM 1.2’ - Enables dTPM 1.2 and disables PTT in SkuMgr.
Warning:
If you enable PTT, dTPM will be disabled and all data saved on it will be lost.
Likewise, if you enable dTPM, PTT will be disabled and all data saved on it will be lost.
►
Firmware Update Configuration
Submenu
Opens submenu to configure management engine technology parameters.
Me FW Image Re-Flash
Disabled
Enabled
Enable or disable Me FW Image Re-Flash function.
8.4.12
SMART Settings Submenu
Feature
Options
Description
SMART Self Test
Disabled
Enabled
Run SMART self test on all HDDs during POST.
8.4.13
Super IO Submenu
Feature
Options
Description
Super IO Chip
W83627
SIO Clock
24MHz
Super IO base clock.
Serial Port
Disabled
Enabled
Enable or disable serial port (COM).
Device Settings
IO=3F8h
IRQ=4
Displays the currently used settings.
Serial Port
Disabled
Enabled
Enable or disable serial port (COM).
Device Settings
O=2F8h
IRQ=3
Displays the currently used settings.
Parallel Port
Disabled
Enabled
Enable or disable parallel port (LPT/LPTE).
Device Settings
IO=378h
IRQ=5
Displays the currently used settings.