Copyright
©
2016
congatec
AG
ICSLm13.indd
64/95
8.4.2
Watchdog Submenu
Feature
Options
Description
POST Watchdog
Disabled
30sec
1min
2min
5min
10min
30min
Select the timeout value for the POST watchdog.
Note:
The watchdog is only active during the system POST and provides a facility to prevent errors
during boot up by performing a reset.
Stop Watchdog For User Interaction
No
Yes
Select whether the POST watchdog should be stopped during the popup boot selection menu or while
waiting for the setup password.
Runtime Watchdog
Disabled
One-time Trigger
Single Event
Repeated Event
Select the operating mode of the runtime watchdog.
‘One-time Trigger’ - Disables watchdog after first trigger.
‘Single Event’ - Executes every stage only once before the watchdog is disabled.
‘Repeated Event’ - Executes last stage repeatedly until reset.
Note:
This watchdog will be initialized just before the operating system starts booting.
Delay
Disabled
10sec
30sec
1min
2min
5min
10min
30min
Select the delay time before the runtime watchdog is activated.
Note:
This feature may be used to ensure that the operating system has enough time to load.
Event 1
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 1 is reached. For more information about
ACPI Event read the note at the end of this table.
Event 2
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 2 is reached.
Event 3
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 3 is reached.
