Copyright
©
2016
congatec
AG
ICSLm13.indd
34/95
Note
congatec offers cables and adapter for the eDP interface (see section 1.2.2 “Optional Accessories/Cables”). For more information, contact
the congatec technical solution department.
5.4.3.1
Backlight Power Connector
The conga-IC170 provides backlight power on connector X22.
Table 21 Connector X22 Pinout Description
Pin
Signal Name
Description
1
eDP_LVDS_BKLT_EN
Backlight enable
2
eDP_LVDS_BKLT_CTRL
Backlight control
3
BKLT_PWR
Backlight inverter power
4
BKLT_PWR
Backlight inverter power
5
GND
Backlight ground
6
GND
Backlight ground
7
Brightness_Up
Flat panel brightness increase
8
Brightness_Down
Flat panel brightness decrease
Connector Type
X22: 2 mm, 8-pin crimp style connector
Mating connector: Chyao Shiunn JS-1124-08
Note
congatec offers an open-end cable for this interface (see section 1.2.2 “Optional Accessories/Cables”). For more information, contact the
congatec technical solution department.
Backlight Power - Connector X22