Copyright
©
2016
congatec
AG
ICSLm13.indd
16/95
2.4
Supply Voltage Power
•
12-24V DC ± 5%
2.5
Power Consumption
The power consumption values were measured using the following test setup:
•
Input v12V
•
conga-IC170 SBC
•
conga-IC170 cooling solution
•
Microsoft Windows 7 (64 bit)
Note
The CPU was stressed to its maximum workload with the Intel
®
Thermal Analysis Tool.
The power consumption values were recorded during the following system states:
Table 9
Measurement Description
System State
Description
Comment
S0: Minimum value
Lowest frequency mode (LFM) with minimum core voltage during
desktop idle.
S0: Maximum value
Highest frequency mode (HFM/Turbo Boost).
The CPU was stressed to its maximum frequency.
S0: Peak current
Highest current spike during the measurement of “S0: Maximum
value”. This state shows the peak value during runtime
Consider this value when designing the system’s power supply, to
ensure sufficient power is supplied during worst case scenarios.
S3
SBC is powered by 12V.
S5
SBC is powered by 12V.
Note
1. The fan and SATA drives were powered externally.
2. All other peripherals except the LCD monitor were disconnected before measurement.
