Copyright
©
2018
congatec
AG
TEVA2m11
25/56
4.5.1
PEG x16 Slot
The conga-TEVAL/COMe 3.0 provides a PEG port on a standard PCIe x16 slot connector (X6).
Connector Type
X6: PCIe x16 card
4.5.2
PCIe x4 Slot
The conga-TEVAL/COMe 3.0 provides a standard PCIe x4 slot connector X9 (Slot 0). This slot, which is routed to the module’s PCIe lanes 0–3,
shares:
•
PCIe lane 1 with connector X10 (Slot 1)
•
PCIe lane 2 with connector X7 (Slot 2)
•
PCIe lane 3 with connector X8 (Slot 3)
PCIe Slot 0 supports one PCIe lane (x1 link) by default. For x2 or x4 link, set DIP SW1 as described in the table below:
Table 15 SW1 - PCIe x4 Slot Configuration
SW1
SW2
Description
OFF
OFF
x1 PCIe link (default)
OFF
ON
x2 PCIe link
ON
ON
x4 PCIe link
Note
You must also configure the PCIe link on the module.
Connector Type
X9: PCIe card
X6
X9
SW1
1
2
0N
