Conel CLEAR SOFT TWIN, Руководство по эксплуатации

Страница: 80 / 140

80
6.13
RESETTING TO FACTORY SETTINGS
All user-defined settings (e.g. residual hardness and residual hardness correction) can be reset to the fac-
tory settings as follows:
Press
. The display will show the following:
Press

. The display will show the following:
Press <OK> once and then

five times. The display will show the following:
Press <OK>. The display will show the following:
Press

or

to change between <yes> and <no>.
When <yes> is selected, the following default values are restored by pressing <OK>:
/ Residual hardness 8 °dH
/ Residual hardness correction = 0
/ Backlight 80 %
/ Contrast 80 %
6.14
DISPLAY MESSAGE OVERVIEW
Main menu
· Regeneration
Main menu
· Settings
Setting
· Factory setting
Factory setting
<no>
Display Description Further information
Maintenance/
Service req.
Message shown after an annual
maintenance period.
see chapter 9.4 “MESSAGE “MAINTE-
NANCE/SERVICE””
Salt level
verify!
Message shown after 100 regener-
ations.
see chapter 6.6.1 “MESSAGE “VERIFY SALT
LEVEL””
Salt level count
was reset
Shown after manual reset of salt
quantity regeneration counter.
see chapter 6.6.1 “MESSAGE “VERIFY SALT
LEVEL””