Conductrix Wampfler ProfiDAT compact, Руководство пользователя

Страница: 12 / 32

12
System Components
Feed-In Components
Feed-In Sets
End feed-in set = 2 feed-in rails with rail end caps
52
49
x
x 100 x 100
ø15 ø15
x 500 500 L
Connected to access point
Terminating resistor
X = see page 27, Rail End Caps
End feed-in set - rail with positioning strip (rail end caps included) – Part No.: 051551-03
End feed-in set - rail without positioning strip (rail end caps included) – Part No.: 051551-04
Feed-in sets introduce data signals from access points into the ProfiDAT
®
compact rail and terminate them at the end of a segment with stationary antennas integrated
into the rail profile� Therefore one stationary antenna is connected to an access point and the stationary antenna on the opposite side of a segement is connected to a ter-
minating resistor� Access points function as interface between the customer’s network and the ProfiDAT
®
compact system� Feed-in sets are available for ProfiDAT
®
compact
systems with or without positioning and for either end or line feed-in� End feed-in sets are additionally equipped with rail end caps�
Terminating resistors will be supplied with the access points�
Set includes:
• 2 feed-in rails (one for each end)
• 2 end caps
• 2 rail connectors