Mounting Instruction
Conductor rail system
MultiLine 0835
MAL0835-0001c-EN
www.conductix.com
translated document
page 5 of 81
1
General information
1.1
Information about this mounting instruction
The information provided in this mounting instruction is designed to enable the above device to be used safely and efficiently.
The mounting instruction forms part of the device and must be kept accessible to personnel at all times and stored right by the
device. Personnel must read these instructions carefully and understand them before starting any work. The basic prerequisite for
safe work is compliance with all safety and operating guidelines in this mounting instruction.
Local accident protection regulations and general safety guidelines for the area of use of the device also apply.
Illustrations in this document are provided for illustration purposes only and can deviate from the actual design of the conductor
rail system.
In addition to this mounting instruction, the instructions in the appendix for the individual system components also apply.
1.2
Limitation of liability
All of the data and information in this document has been compiled taking into account all valid standards and regulations, as well
as the state-of-the art and our long years of experience and knowledge.
The manufacturer is in no way liable for damage resulting from:
Failure to comply with this installation and mounting instruction
Improper use
Use by untrained personnel
Unauthorized modifications
Technical changes
Use of unauthorized replacement parts and accessories
The actual scope of delivery may differ from the explanations and descriptions provided here if the model in question is a special
one, if additional equipped has been ordered or due to recent technical changes.
The obligations agreed upon in the delivery agreement and our General Terms of Business apply, as do the delivery conditions of
the manufacturer and all legal regulations applicable at the time the contract was concluded.
All products are subject to technical modifications in the context of improvement of function and further development.
1.3
Copyright
This installation and mounting instruction is subject to copyright and exclusively intended for internal use by the customer.
Provision of the installation and mounting instruction to third parties, duplications in any form – even in part – as well as the reuse
and/or disclosure of their content are not permitted without the written approval of the manufacturer, except for internal use by
the customer.
Breach or infringement will result in liability for damages. This shall not affect our right to assert claims for further loss or damage.
