Condair DRAABE HighPur, Инструкция по установке и эксплуатации

Страница: 20 / 44

20 Mounting the nebulizers
5.3 Mounting DRAABE TurboFogNeo 8
5.3.1 Additional information on positioning DRAABE TurboFogNeo 8
– The maximum installation height should not be exceeded so as to not make access unnecessarily
difficult.
– The air space in front should be free at a 360° angle and a distance of 4 m. (For further details, see
the graphic below)
– The stubs with the DN4 high-pressure hose, starting from the short T-connector, must not exceed
6 m in length.
5.3.2 Positioning DRAABE TurboFogNeo 8
A
1
2
3
B
C (3 – 4 m) D
(2 m)
C
(3 – 4 m)
D (2 m)
C
A – Ceiling distance
B – Ground clearance
C – Free air gap to the front
D – Free air gap auxiliary line
1 – Object (e.g. pillars) in the permitted corridor
2 – Permitted corridor
3 – Aerosol mist
Fig. 9: Positioning DRAABE TurboFogNeo 8
Minimum clearances TurboFogNeo8
Ceiling clearance [A] 1.0 m
Floor clearance [B] 4.0 – 6.0 m
Free air gap [C] 3.0 – 4.0 m
Free air gap [D] 2.0 m