Condair DRAABE HighPur, Инструкция по установке и эксплуатации

Страница: 10 / 44

10 Product overview
3 Product overview
3.1 Functional description
Only water for nebulization and the power supply must be supplied to the nebulizers as single-substance
nebulizers.
For all types, the water supply is provided by the DRAABE DuoPur/TrePur/HighPur high-pressure pure
water system and the power supply is provided via the DRAABE HumPower II (120-230 VAC, 50-60 Hz
and 24VDC).
The room air humidity is recorded in a humidification zone and as soon as it falls below the set value,
the humidification zone requests water from the high-pressure system. If the humidification zone is no-
tified by DRAABE HumCenter II that an operating pressure of 85 bar has been reached, it triggers the
nebulizer with its power supply. As soon as this reaches the nebulizer, a ventilator and a magnetic valve
(MV) are switched on; humidification is active.
The humidification output of the atomizers can be set individually in some cases by selecting the nozzles.
The nozzles have a capacity in the increments 1.0 l/h, 1.5 l/h and 2.5 l/h . It can also be easily adapted
after installation if required. Contact your sales partner.