_ REMOvING THE CONCORD TRANSFORMER wITH TwINFIX
To remove the CONCORD TRANSFORMER, pull the
TWINFIX button (
09
) forwards and move the seat fully
forwards. Next, slide the locking buttons on the outer sides
of the TWINFIX adapters (
10
) forwards until the safety
indicators are red.
Now pull the seat forwards and away from the ISOFIX points.
36
37
Lay the seat with the back on a flat surface.
Pull the TWINFIX button (
09
) and then press
down on the seat section of the child seat until
the TWINFIX adapters (
10
) are fully retracted!
To avoid damaging the outside of the seat, check
that the surface you place it on is clean, smooth
and as soft as possible!
_ vEHICLES SUITABLE FOR TwINFIX
The CONCORD TRANSFORMER with CONCORD TWINFIX system has been certified
for “semi-universal” use and is suitable for installation on the seats of specified
vehicles.
Please refer to the additional “CAR FITTING LIST” leaflet for an overview of cars and
vehicle seats compatible with the CONCORD TWINFIX system at the time your child
seat was manufactured.
For a continuously updated version, please visit www.concord.de.
Содержание TRANSFORMER XT
Страница 1: ......
