Copyright
®
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 3
Firmware update instructions for the Conceptronic CH3WNAS
1.
Login to the CH3WNAS. The default settings are:
IP address
:
http://192.168.0.30
User name
: admin
Password
: <empty>
2.
Press the ‘
Configuration
’ button.
3.
Click on ‘
Tools
’ in the top menu bar.
4.
Click on ‘
Firmware
’ in the left menu bar.
5.
Click on the ‘
Browse
’ button to locate the firmware file. When done it will appear in
the ‘
File path
’ field.
6.
Click '
Apply
'.
7.
The upgrade will start. Follow the instructions on your screen.
8.
When the upgrade process is completed the CH3WNAS will reboot automatically.
9.
A factory reset is needed to make sure the firmware becomes fully functional:
Note:
When a factory reset is initiated, all previous settings will be lost. As a result,
the CH3WNAS will need to be reconfigured afterwards.
-
Login to the CH3WNAS as described at point 1.
-
Click on ‘
Tools
’ in the top menu bar.
-
Click on ‘
System
’ in the left menu bar.
-
Click on ‘
Restore
’ under the ‘
Default
’ section and follow the instructions on
your screen.
10.
The CH3WNAS is now fully updated and ready to be used. Don’t forget to reconfigure
your CH3WNAS before use (if needed).
