BIOS utility - 65
BIOS
UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you
do not normally need to run this utility. However, if you encounter
configuration problems, you may need to run it.
To activate the BIOS utility, press
F2
while the computer logo is being
displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility,
then press
F1
to access
Advanced Settings
to select
Boot
from the
categories listed on the left of the screen.
Setting passwords
To set a password on boot, activate the BIOS utility, then press
F1
to
access
Advanced Settings
to select
Security
from the categories
listed on the left of the screen.
Find
Set Supervisor Password
and enter a password to enable this
feature. Once you have entered a password for this feature, you may
then enable/disable
Password on Boot
.
Remember to select
F10
to properly save and exit the BIOS utility
when you are done making changes.
Содержание 3 Ezel
Страница 1: ......
Страница 24: ...24 Active Stylus CC315 73G CC315 73P ...
Страница 45: ...Connecting to the Internet 45 6 If required enter the network s password ...
