Concept2 IDV 2660n, Руководство пользователя

Страница: 51 / 64

EN
48 IDV2660
PRODUCT DESCRIPTION
1. Front left hotzone ( ø 180 mm)
2. Rear left hotzone (
ø
180 mm)
3. Rear right hotzone ( ø 180 mm)
4. Front right hotzone ( ø 180 mm)
5. Control panel
DESCRIPTION OF THE CONTROL PANEL
1. ON/OFF symbol
2. Symbols for setting the hotzone power level
or setting the timer
3. Display of the set hotzone power level
4. Display of the set time
5. Symbol for setting the timer
6. Symbol for activation/deactivation of the child lock
7. Symbols for the selection of the hotzone
Accessories
A Scraper
OPERATING INSTRUCTIONS
• Areas designed only for cooking – electrical hotzones – are indicated on the heating plate. The diameters of the
hotzones are derived from the usual dimensions of cooking utensils.
• Only the surface inside the indicated diameter is heated; other surfaces remain relatively cold and can be used as lay-
aside areas.
• The temperature limiter prevents hotzones under the glass-ceramic plate from overheating.
• The shining “
H ” symbols on the indicator position of the input levels signal increased temperature of the hotzone
after switching off. The hot area can be energetically utilised. The symbol will go off as soon as the hotzone has cooled
down to such a temperature that there is no longer any risk of burning.
• The inputs of hotzones are controlled within the range of 9 levels, which can be selected by pressing the touch
symbols with respective indicators on the control panel. At each pressing of a symbol a beep can be heard. The
response time for pressing a symbol is 1 second, for which period it is necessary to hold your finger on the symbol.
1
4
5
2
3
6 2 3
7 4 1 5
EN
49
IDV2660
WARNING!
• The touch control is activated by placing a finger on the required symbol on the glass-ceramic plate. Therefore, keep
the control panel clean and dry.
• The sensors do not respond to matte, dark colours (do not use black gloves). Do not place anything on the control
panel of the heating plate.
• Make sure the unit is prevented from being accidentally switched on, e.g. by a pet.
• When the heating plate is disconnected from the mains, the set parameters are reset and the heating plate control is
locked.
• In monophase connection (see Connection of the terminal box) all the hotzones cannot be used at maximum power.
To prevent power overload of the respective circuit breaker, the unit automatically reduces the input of individual
hotzones.
Before first use
Prior to the start of use of a new unit, wipe it with a wet and then a dry cloth.
Switching on the heating plate
To switch on the heating plate, press the ON/OFF symbol (1). If you do not make a further selection within 1 minute, the
heating plate automatically switches off.
Switching on a hotzone
1. Press the symbol for hotzone selection (7) to activate the hotzone. „0“ symbol is blinking for the selected hotzone on
the display (3).
2. Press the “+” or “–” symbol (2) repeatedly to set the required power level to a value of 1 through 9 . If you do not set
the power level within 5 seconds, the heating plate returns to the hotzone selection mode.
Note: If the „
U
“ symbol is shining on the display (3), the cooking utensil’s bottom diameter is too small or it is made of
an unsuitable material. Use a smaller hotzone or utensil with a larger bottom diameter or a utensil made of another
material.
Switching off a hotzone
1. Press the symbol for hotzone selection (7) to activate the hotzone (number of the selected hotzone is blinking).
2. Set the power level to „0“ gradually by repeatedly pressing the „-“ symbol, or switch the hotzone off by simultaneously
pressing both the symbols „+“ and „-“.
3. After the hotzone has been switched off, its display may show the „H“ symbol indicating that the zone is hot and there
is a risk of burning. This residual heat can be utilised.
Child lock function
This function prevents unwanted operation of the heating plate. Procedure:
a) Locking
Press and hold the symbol for activation/deactivation of the child lock (6) until a beep is heard. The „Lo“ symbol (locked)
will be illuminated on the display (3). Thus the control panel of the heating plate is locked except for the ON/OFF symbol
(1).
b) Unlocking
Press and hold the symbol for activation/deactivation of the child lock (6) until a beep is heard. „Lo“ symbol will go off.
Hotzone delayed OFF function
1. Press the symbol for hotzone selection (7) to activate the hotzone. The power level is displayed on the respective
(5)
(5)
(4)
(4)
EN
51
IDV2560wh | IDV2660n