External IR Network High Speed Dome
ii
V1.0 (01-03/2017)
Precautions
User Manual
!
Strictly conform to local electrical safety standards and use power adapters that are
marked with the relevant LPS standard when installing and using this device.
Otherwise, this device may be damaged.
!
Only use accessories delivered with this device. The voltage must meet input
voltage requirements for this device.
!
If this device is installed in places with unsteady voltage, ground this device to
discharge high energy such as electrical surges to prevent the power supply from
burning out.
!
When this device is in use, ensure that no water or any other liquid flows into the
device. If water or liquid unexpectedly flows into the device, immediately power
off the device and disconnect all cables (such as power cables and network cables)
from this device.
!
Do not focus strong light (such as lighted bulbs or sunlight) on this device.
Otherwise, the service life of the image sensor may be shortened.
!
If this device is installed in places where thunderstorms and lightning frequently
occur, ground the device nearby to discharge high energy such as lightning strikes
to prevent device damage.
!
Avoid heavy loads, intensive shaking, and soaking to prevent damage during
transportation and storage. The warranty does not cover any device damage that is
caused during secondary packaging and transportation after the original packaging
is opened.
!
Protect this device from drops and intensive strikes, keep the device away from
magnetic field interference, and do not install the device in places with vibrating
surfaces or shocks.
!
Clean the device with a soft, dry cloth. For stubborn dirt, dip the cloth into
slightly neutral cleanser, gently wipe the dirt with the cloth, and then dry the
device.
!
Do not jam the ventilation opening. Follow the installation instructions provided in
this document when installing the device.
!
Keep the device away from heat sources such as radiators, electric heaters, or other
heating equipment.
!
Keep the device away from moist, dusty, extremely hot or cold places, or places
with strong electric radiation.
!
If the device is installed outdoors, take insect- and moisture-proof measures to
avoid circuit board corrosion that can affect monitoring.
!
Remove the power plug if the device is idle for an extended period.
!
Before unpacking, check whether the fragile sticker is damaged. If the fragile
sticker is damaged, contact customer services or sales personnel. The manufacturer
shall not be held responsible for any artificial damage to the fragile sticker.