Concept Pro VHDIPL-32, Руководство пользователя, Страница: 18 / 26

5 Quick Setup
Network Video Recorder(NVR)
12 Issue V1.1 (2014-07-15)
!
Formatting will clear all video data on the hard disk. Use this function only when
necessary.
!
The NVR must be connected to a stable power supply during runtime; otherwise,
the hard disk may be damaged or data may be lost.
You can manage the hard disk of the NVR as follows:
!
Format the hard disk. Click Format . In the displayed dialog box, click Yes .
!
Check the status of the hard disk (usable, abnormal, unformatted, and unavailable).
!
Check the used space and total space of the hard disk.
Area 4: Select IP Cameras
When the function of private network for cameras is enabled, the NVR automatically
searches for IP cameras in the network.
!
When the number of IP cameras in smaller than the number of channels the NVR
can manage, the VHDIPL will automatically detect IP cameras to be managed.
!
When the number of IP cameras found is greater than the number of channels the
NVR can manage, will display the prompt (Figure 5-2), from here the cameras that
need to be managed by the VHDIPL can be selected by IP address, as shown in
Figure 5-2. The cameras will then also be set on 24*7 recording
Figure 5-2 Prompt message indicating discovery of a device
You must select the devices managed by the NVR. Click Ignore to use the IP cameras
already managed, or click Select . The Select Camera page is displayed, as shown in
Figure 5-3.