Before setting up the unit, carefully read
through this manual to familiarize yourself
with the features and design layout. Then
follow the easy step-by-step instructions to
install and operate.
Your CONAIRPHONE
TM
is designed for use
with telephone systems using modular
connections. If your home or office uses four
prong or hard wired systems, your retailer
may offer a complete line of convenient “do it
yourself” modular conversion accessories.
Your telephone is FCC approved for
connection to your telephone line. For future
reference, enter the date code of your unit and
the date purchased in the spaces provided
below. You can find your phone’s date code at
the bottom of the unit.
Date Code:
Date of Purchase:
IMPORTANT SAFETY
INSTRUCTIONS
When using your telephone equipment, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
injury to persons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the products.
3. Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this product near water, for
example, near bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or
near a swimming pool.
5. Do not place this product on an unstable
cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the
back or bottom are provided for ventilation,
to protect it from overheating. These
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on the bed, sofa, rug, or
similar surface. This product should never
be placed near or over a radiator or heat
register. This product should not be placed
in a built-in installation unless proper
ventilation is provided.
7. Never push objects of any kind into this
product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind
on the product.
8. To reduce the risk of electric shock, do not
disassemble this product, but take it to a
qualified serviceman when some service or
repair work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when
the appliance is subsequently used.
9. Unplug this product from the wall outlet and
refer servicing to qualified service
personnel under the following conditions:
A. When the power supply cord or plug is
damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or
water.
D. If the product does not operate normally
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions because improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
product to normal operation.
E. If the product has been dropped or the
cabinet has been damaged.
F. If the product exhibits a distinct change in
performance.
10. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
11. Do not use the telephone to report a gas
leak in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
1. Never install telephone wiring during a
lightning storm.
2. Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
3. Never touch uninsulated telephone
wires or terminals unless the telephone
line has been disconnected at the
network interface.
4. Use caution when installing or modifying
telephone lines.
1
2
3