Conair TrueBlend TB500-4, Руководство пользователя

Страница: 42 / 150

Start-up TrueBlend ™
40 Edition: February 2007
6.0 Start-up
IMPORTANT
Please remove the protective film on the touchscreen control for optimum
performance
Familiarize yourself with the basic functions of the controller before start-up (see
chapter 7.7).
7.0 Operation
The TrueBlend series blender is controlled at the touchscreen on the operator sta-
tion controller. It can be swung forward for ease of use (see also 4.4 Positioning
controller).
The operation of the TrueBlend with four components and with conveying is de-
scribed below. If the loader symbol is disabled in the start screen of your control-
ler (see 7.3.1), you can ignore the section 7.19 Hopper loaders.
7.1 Switching on
The following prerequisites apply for operation of the unit:
•
The unit is correctly wired (see 4.5.2).
•
The compressed air is connected (see 4.5.1).
•
All material hoppers are filled with the correct material.
7.1.1 Switch on main switch
Î Switch the main switch to "l" (ON).