Follow the steps for care and cleaning.
FILLING THE WATER CONTAINER
(PRIOR TO PLUGGING IN THE APPLIANCE)
Remove the water container with the handle
OPERATING THE STEAMER
1. Make sure the "I"/"O" (ON/OFF) switch is
in the "O" (OFF) position.
2. Make sure all hose connections are
secure and tight.
3. Make sure the telescopic pole is fully
extended and the hose is not twisted
or kinked.
4. Plug the steamer cord into a normal
electrical outlet.
5. Turn the "I"/"O" (ON/OFF) switch to the
"I" (ON) position.
6. The switch will light to indicate when
power is "I" (ON)
7. Steam will be produced from the
nozzle in about one minute.
8. To turn the steamer off, turn the "I"/"O"
(ON/OFF) switch to the "O" (OFF) position.
Cool-touch
handle with
easy-grip
raised ribs
Removable
5ft. cool-touch
insulated hose
with storage clip
Telescoping pole
hangs garments
and nozzle and
collapses for
storage
360˚ rotating
hanger
Steam nozzle
Removable, easy-
to-fill and easy-
to-clean 2.5-liter
water tank with
integrated carry
handle
GETTING TO KNOW
YOUR STEAMER
Pant clips
Fig. 4
Fig. 5
and turn upside down. Unscrew the valve
in the center of the base. Fill container by
holding container under a source of running
cold water until the container is filled to the
desired level. Do not overfill. Screw the valve
cap onto the water container and return the
container to the upright position. Place the
water container onto the base and make cer-
tain it is seated properly in the cavity.
DO NOT FILL THE CONTAINER WITH HOT
WATER.
