Comtrol RocketLinx MP1204-XT, Руководство пользователя

Страница: 31 / 414

RocketLinx MP1204-XT User Guide : 2000644 Rev. A Configuring the IP Address - 31
Using the Web Interface to Configure the IP Address
Using the Web Interface to Configure the IP Address
You must have the MP1204-XT connected to your network and you may need to change your IP address on
your system before you can telnet into the MP1204-XT.
Note: The default IP address of the MP1204-XT is 192.168.250.250.
1. Open your browser and enter
192.168.250.250
.
2. Click
Configuration | System | IP
.
3. Select the
Mode
(
Host
or a
Router
). In
Host
mode, IP traffic between interfaces will not be routed. In
Router
mode traffic is routed between all interfaces.
Note: Refer to the help or System | IP on Page 38 for more information about the options on this page.
4. If applicable, select the appropriate DNS option.
5. Enter the
IP Address
and
Mask Length
.
6. If desired, add interfaces or IP routes.
7. Click the
Save
button.
8. Click Maintenance | Configuration | Save startup-config .
9. Click the
Save Configuration
button.