background image

ROCKET

LINX

 

ACS7106

Industrial PoE Plus Switch

QUICK INSTALLATION GUIDE

2000572 Rev A | Release Date - April, 2013

LEDs

This table provides information about the LEDs on 

the ACS7106. 

LED Name LED On

LED Blinking

LED Off

PWR - 

Green

System 

power 

ready

Not applicable

System not 

ready

PoE 

(P1 - P4) - 

Green

Valid PoE 

output and 

PoE PD is 

powered

Active PoE

Not 

applicable

Link/Act 

(P1 - P6) - 

Green

Port 

connected

Port active

Port link 

down or 

port not 

connected

ALM 

(Alarm) - 

Red

Relay is 

active and 

contacts 

have been 

shorted

Not applicable

Relay not 

activated 

or no fault 

condition 

has occurred

ABOUT COMTROL

For more than 30 years, Comtrol Corporation has been 

a manufacturer and provider of quality networking and 

industrial data communication products, specializing 

in industrial Ethernet and device connectivity.  With 

representation across North America, EMEA, Asia and 

Latin America, Comtrol sells RocketLinx™ industrial grade 

Ethernet and Power over Ethernet switches, DeviceMaster® 

Ethernet device servers and gateways and RocketPort® 

multiport serial cards through distributors, resellers and 

integrators worldwide.  Providing exceptional product and 

technical support, Comtrol establishes solutions for a wide 

range of security, energy, industrial automation and traffic 

and transportation applications. 

CONTACT US

Support

 

www.comtrol.com/pub/en/support

Downloads

 

ftp://ftp.comtrol.com/html/ACS7106_main.htm

Website

 

www.comtrol.com

Phone

  

(800)926.6876 or (763)957.6000

      

connect. communicate. control. 

INTRODUCTION

The RocketLinx ACS7106 is an industrial UL294 listed 

Power over Ethernet Plus (PoE+) switch with voltage 

boost technology.  The ACS7106 provides power 

and Ethernet communications to PoE devices.  The 

ACS7106 features four Fast Ethernet PoE Plus ports and 

two Gigabit uplink ports to ensure a high-bandwidth 

connection.  The ACS7106 is compliant with the IEEE 

802.3af/802.3at PoE standards to deliver a maximum of 

30W per port.  The total PoE power budget for the ACS 

7106 in UL294 installations is 90W and 100W in 

non-UL294 applications.

Using the alarm output relay, the ACS7106 can 

automatically warn the administrator if there are port 

or power failures on the PoE ports and port failures 

on the Gigabit ports. The ACS7106 is suitable in harsh 

environments because it meets the requirements of the 

stringent UL294 requirements and reliably operates in 

-40 to 55°C environments.

See Comtrol’s website for detailed product 

specifications.

TECHNICAL SPECIFICATIONS

Electrical Specifications

Value

Number of Ports

• Four 10/100BASE-TX PoE

• Two 10/100/1000BASE-TX

Power Input

12-24VC

Power Consumption 

(Without PD Loading)

• 700mA @ 12VDC

• 350mA @24VDC

Power Consumption

(With PD Loading) 

• 6.8A @ 12VDC

• 4.8A @ 24VDC

• 4.5A @ 24VDC (UL294)

Max, Output/Power PoE Port

30W

Standard 

PoE 

Voltage 

Output

@ACS7106 output 

ports

52-54.3VDC

100m* Cat5e @30W 

(24AWG)

47-49VDC

100m* Cat5e @30W 

(26AWG)

44.5-46VDC

* At the end of the specified distance

Note:

 Exceeding the recommended power and operating 

temperatures may result in failures or damage. 

Electrical Specifications

Value

Total PoE 

Power 

Budget

UL294 installation 

(VIN = 24VDC)

90W

UL294 installation 

(VIN = 12VDC)

60W

Non-UL294 

installation 

(VIN = 24VDC)

• 100W @ operating    

   temperature -40º - 50ºC 

• 90W @ operating 

   temperature 50º - 55ºC

Non-UL294 

installation 

(VIN = 12VDC)

60W @ operating 

temperature -40º - 55ºC

Operating Temperature

• -40º - 55ºC

• 0º - 49ºC (UL294)

Storage Temperature

-40º - 85ºC 

Operating Humidity

0 - 95%

The product is UL listed for an operating temperature range of -40º 

to 55ºC. Comtrol has qualified and tested the product to operate at 

temperatures up to 60ºC. At 60ºC, the product can provide a maximum 

PoE output of 90W with an input voltage of 24VDC and 60W with an 

input voltage of 12VDC. For installation requiring UL60950 listing, the 

product should only be operated between -40º and 55ºC. If the product 

is operated at 60ºC, caution must be taken to not touch the hot surface 

of the product enclosure. 

- 3 -

- 4 -

- 2 -

-1 -

- 8 -

Rock

etLinx A

CS7106 Installa

tion Diagr

am

Rock

etLinx ACS7106

PoE P

orts

Gigabit Por

ts

P1

P2

P3

P4

P5

P6

12-24

AWG W

ires

Relay 

Output

1A@24VDC

Pow

er Supply

12-24VDC

(UL Listed**)

Alar

m

Pow

er Sour

ce

Ether

net Swit

ch

or Ser

ver

Acc

ess Con

troller

or Netw

ork

Enabled Devic

e

Cat 5 c

ables or higher

PoE 

Powe

red

Devic

(PD)*

PoE 

Powe

red

Devic

(PD)*

PoE 

Powe

red

Devic

(PD)*

PoE 

Powe

red

Devic

(PD)*

*PD

   

For ex

ample: PoE (IEEE 802.3a

f/802.3at compliant c

ard r

eaders, r

emote ac

cess 

   

 panels, or 

camer

as

**

    

 

For UL294 installations

, the pow

er supply must b

e regulat

ed and UL294 compliant

802.3af

  

Cat 5 or higher c

able

802.3at

  

Cat 5e or higher c

able 

LEDs

10/100 PoE+ Ports

Gigabit Uplink Ports

Relay DIP switches

Power/Relay

Содержание ROCKETLINX ACS7106












Отзывы: