Comtrol interchange vs1000, Руководство по установке и настройке

Страница: 20 / 46

20 NetWare Connect Installation and Configuration
Novell NetWare
20. Select
Configure NetWare Connect.
21. Use the options on this menu to configure
Port Groups
and
Security
as needed. For more information, see the Novell documentation.
22. Press
Esc
to back out to the NetWare Connect Options menu.
23. Select
View NetWare Connect Status.
The Status Options menu is displayed.
24. Select Display Port Status . The Port Status window displays:
If the status of all configured ports is “Waiting,” you have correctly
completed setup and configuration. At this point, the system is
ready for users to dial in and access the server.
25. Press
Esc
to back out of the menu system and exit nwccon.
26. Using a text editor or
install.nlm
, edit the
autoexec.ncf
file. Add the
following:
• One
load aiovs1
command line for each VS1000 installed. Use
the syntax described in Step 1 of this procedure.
• After all load aiovs1 commands, one
bind aiovs1
command line
to bind the protocol stack to the LAN board. Use the syntax
described in Step 3 of this procedure.
At this point, the VS1000/VS1100 units should be fully operational.
The changes you have made to
autoexec.ncf
enable the server to
automatically execute the load and bind commands the next time the
server is downed and restarted.