80 - Managing the DeviceMaster LT
DeviceMaster LT User Guide
: 2000586
Rev. B
Saving Port-Level Configuration
5.
Optionally, change the default file name and click
Save
.
6.
Repeat the previous steps for each DeviceMaster LT for which you want to
save the driver configuration.
Saving Port-Level
Configuration
Use the following procedure to create and save a port configuration file. Port
configuration, must be saved on a port-by-port basis.
1.
If necessary, open the
Comtrol Drivers Management Console
using one of these
methods:
•
Windows Control Panel;
go to your
Control Panel
and click the
Comtrol
Drivers Management Console
.
•
Shortcut
; located under
Start> Program Files> Comtrol> DeviceMaster LT>
Comtrol Drivers Management Console
.
2.
Depending on your operating system, you may need to click
Yes
to the
Do you
want to allow the following program to make changes to this computer?
User
Account Control message.
3.
Highlight the DeviceMaster LT for which you want to save the port-level
configuration.
4.
Highlight the port for which you want to save port configuration.
5.
Click
Save Configuration.
6.
Repeat this process for each port for which you want to save the configuration
settings.
