76 - Managing the DeviceMaster LT
DeviceMaster LT User Guide
: 2000586
Rev. B
Local Using the IP Address or MAC Address
7.
Enter the IP Address for the DeviceMaster LT. It is not necessary to enter the
Subnet Mask and Default Gateway.
8.
Click
Ok
to close the
Add New Device
window. It may take a few moments to
save the DeviceMaster LT.
9.
If necessary, click
Refresh
for the new DeviceMaster LT to display in the
Device
Tree
or
Device List
panes. The DeviceMaster LT shows OFF-LINE if it is not
attached to the network or if an incorrect IP address was entered.
Local Using the IP
Address or MAC
Address
Use the following procedure to add a local DeviceMaster LT to PortVision DX if
you do not want to scan the network.
1.
Locate the network information or MAC address of the DeviceMaster LT you
want to add.
2.
Access the
New Device
window using one of these methods:
•
Click
Add New > Device
in the
Manage
menu.
•
Right-click a folder or a RocketLinx switch in the
Device Tree
pane
(anywhere in the pane, as long as a DeviceMaster LT is not highlighted and
you are in a valid folder) and click
Add New > Device
.
3.
Select the appropriate DeviceMaster LT in the
Device Type
drop list.
4.
Select the appropriate model in the
Device Model
drop list.
5.
Enter a friendly device name in the
Device Name
list box.
