DeviceMaster PNIO | UP User Guide
: 2000639 Rev. A
RedBoot Procedures - 141
RedBoot Procedures
Establishing a Telnet Connection
Use the following procedure to telnet to the DeviceMaster.
1.
Open a telnet session, enter the DeviceMaster IP address.
If using Windows, you can use PortVision DX, see
Commands in Telnet/SSH Sessions (PortVision DX)
2.
Press the
Enter
key if you did not program a password or type the password
and press
Enter
.
Note:
The DeviceMaster does not come pre-programmed with a password.
3.
Type
reset
, and close the session.
4.
Open a new telnet session, enter the DeviceMaster IP address, and the
password.
5.
Type
dis
to disable the Bootloader.
6.
Verify that the system responds with a
Loading disabled
message.
Содержание 99531-9
