Page 1
Quick Install Guide
WAP-60AX WiFi AX4200 Mesh-Enhanced Extender
Understanding the WAP-60AX
LED
LED Status
Description
Power
GREEN
On
The device is powered up.
Off
The device is powered down.
RED
On
There has been a POST (Power On Self Test) failure (not bootable) or device malfunction A
malfunction is any error of internal sequence or state that will prevent the device from normal
operation.
5G
GREEN
On
(5GHz) Wi-Fi is enabled in AP mode.
(5GHz) Wi-Fi is connected with an AP in Repeater mode.
Off
(5GHz) Wi-Fi is disabled in AP mode.
(5GHz) No connection in Repeater mode.
Blink
(5GHz) Wi-Fi is transmitting/receiving.
2.4G
GREEN
On
(2.4GHz) Wi-Fi is enabled in AP mode.
(2.4GHz) Wi-Fi is connected with an AP in Repeater mode.
Off
(2.4GHz) Wi-Fi disabled in AP mode.
(2.4GHz) No connection in Repeater mode.
Blink
(2.4GHz) Wi-Fi is transmitting/receiving.
WPS
GREEN
On
(2.4GHz+5GHz) WPS connection is successful.
Off
No WPS association process is ongoing.
Blink
(2.4GHz+5GHz)WPS connection is in progress.
AP
GREEN
On
The device is working in AP mode.
Off
The device is not working in AP mode.
Repeater
GREEN
On
The device is working in Repeater mode.
Off
The device is not working in Repeater mode.
2.5GE
GREEN
On
The 2.5 Gigabit Ethernet is connected.
Off
The 2.5 Gigabit Ethernet is not connected.
Blink
The 2.5 Gigabit Ethernet is transmitting/receiving.
Port/Button
Description
Reset
Factory Reset Function
: Press and hold this button for over 10 seconds.
LAN
Optional:
Use this port to connect an Internet- enabled device (e.g. laptop, set-top-box, etc.).
A
WPS Button
AP/Repeater Switch
2.5 Gigabit
Ethernet Port
On/Off Button
Power Jack
Reset Button
LED Details are
Below