![Comtrend Corporation NexusLink 5631 Скачать руководство пользователя страница 48](http://html1.mh-extra.com/html/comtrend-corporation/nexuslink-5631/nexuslink-5631_user-manual_2648722048.webp)
47
5.2.3 ATM
statistics
ATM Interface Statistics
Field Description
In Octets
Number of received octets over the interface
Out Octets
Number of transmitted octets over the interface
In Errors
Number of cells dropped due to uncorrectable HEC errors
In Unknown
Number of received cells discarded during cell header validation,
including cells with unrecognized VPI/VCI values, and cells with
invalid cell header patterns. If cells with undefined PTI values
are discarded, they are also counted here.
In Hec Errors
Number of cells received with an ATM Cell Header HEX error
In Invalid Vpi Vci
Errors
Number of cells received with an unregistered VCC address.
In Port Not
Enabled Errors
Number of cells received on a port that has not been enabled.
In PTI Errors
Number of cells received with an ATM header Payload Type
Indicator (PTI) error
In Idle Cells
Number of idle cells received
In Circuit Type
Errors
Number of cells received with an illegal circuit type
Содержание NexusLink 5631
