3.4 Basic Configuration
This screen allows the user to configure the LAN interface on the CT-402.
IP Address:
Enter the IP address for the CT-402 LAN port.
NetMask:
Enter the subnet mask for the CT-402 LAN port.
NOTE:
Click the
Apply
button to immediately change the IP settings. These new
settings will remain until you reboot the device. If you wish to keep the
new IP configuration after power off or reboot, you must save settings. If
you wish to return to the default configuration immediately, you can erase
settings. See section 3.6 Setting for further details.
3.5 Upgrade Firmware
This screen allows for software updates. Detailed instructions follow this figure.
10
