Comtrend Corporation CT-5611E, Руководство пользователя

Страница: 20 / 82

Chapter 4 Quick Setup
After login, the Quick Setup screen will appear as shown.
The Quick Setup screen allows the user to configure the ADSL router for DSL
connectivity and Internet access. It also guides the user through the WAN
network setup first and then the LAN interface setup. You can either manually
customize the router or follow the online instructions to set up the router.
The following configuration considerations apply:
•
•
•
•
•
The WAN network operating mode operation depends on the service provider’s
configuration in the Central Office and Broadband Access Server for the PVC
If the service provider provides PPPoE service, then the connection selection
depends on whether the LAN-side device (typically a PC) is running a PPPoE
client or whether the router is to run the PPPoE client. The router can support
both cases simultaneously.
If some or none of the LAN-side devices do not run PPPoE client, then select
PPPoE. If every LAN-side device is running a PPPoE client, then select Bridge.
In PPPoE mode, the router also supports pass-through PPPoE sessions from
the LAN side while simultaneously running a PPPoE client fro non-PPPoE LAN
devices.
NAT and Firewall are always enabled in PPPoE or PPPoA modes, optional for
MER or IPoA modes, and always disabled in Bridge mode.
Depending on the network-operating mode and NAT and firewall status, the
main panel will display or hide the NAT/Firewall menu. For instance, at initial
setup, the default network-operating mode is Bridge. The main panel will not
show the NAT and Firewall menu.
NOTE: Up to 8 PVC profiles can be configured and saved. To activate a
particular PVC profile, you need to navigate through all the setup
screens, click the
Save button and reboot the system.
19