Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 233 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–39 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Equipment ID
(cont)
l = CnC Data Rate, where:
0=None
1=up to 512 kbps
2=up to 1 Mbps
3=up to 2.5 Mbps
4=up to 5 Mbps
5=up to 10 Mbps
6=up to 15 Mbps
7=up to 20 Mbps
8=up to 25 Mbps
9=up to 30 Mbps
A=up to 40 Mbps
B=up to 51.840 Mbps
C=up to 70 Mbps
m = Sequential Encoding/Decoding Option, where:
0=None
1=Installed
x = Asymmetric Rx Data Rate, where:
0=None
1=10,000 kbps
2=20,000 kbps
3=51,840 kbps
4=155,520 kbps
5=2,500 kbps
Example: >0001/EID=565A0000000000000{CR}{LF} (reports SLM-
5650A with no options installed)
Initialize Events
Pointer
IEP= N/A None Command only.
Resets internal pointer to allow RNE? queries to start at the beginning
of the stored events log.
Note: This command takes no arguments.
IEP=
IEP#
N/A