Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 222 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–28 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Rx Spectrum
Invert
RSI= RSI? 1 byte Command or Query.
Sets or returns Rx Spectrum Invert, where:
0 = Normal
1 = Rx Spectrum Invert
Example: <0001/RSI=0{CR} (selects Normal)
RSI=
RSI?
RSI*
RSI#
RSI=x
Rx Signal Level N/A RSL? 5 bytes Query only.
Returns the value of the Rx signal level in the form sxx.x, where:
s = sign (+/–)
xx.x = Rx signal level value, in dBm, from +15.0 to –60.0 dBm
Example 1: >0001/RSL=+15.0{CR}{LF}
Example 2: >0001/RSL=–60.0{CR}{LF}
Note: Unit returns
∀
99.9 if unit returns value beyond limits.
Example 3: >0001/RSL=+99.9{CR}{LF} (RSL >+15.0 dBm)
Example 4: >0001/RSL=–99.9{CR}{LF} (RSL <–60.0 dBm)
N/A RSL=sxx.x
Rx Demod
Acquisition
Sweep Range
RSW= RSW? 8 bytes Command or Query.
Sets or returns the Rx acquisition sweep range of the demodulator in
the form xxxx.xxx, where:
xxxx.xxx = value, in kHz, ranging from 0 to 60 kHz.
Example: <0001/RSW=0060.000{CR} (selects 60 kHz)
RSW=
RSW?
RSW*
RSW#
RSW=xxxx.xxx