Comtech EF Data Vipersat CDD-562L, Инструкция по установке и эксплуатации

Страница: 170 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
HTTP (Web Server) Interface MN/CDD564L.IOM
9–10
9.3.2.3 Admin | Access
Use this page to set up and maintain the user names, passwords, e-mail server, and host IP
addresses as needed to facilitate communication with the HTTP Interface.
Figure 9-8. Admin | Access page
System Account Access Information
•
Admin, Read/Write, and Read Only Names and Passwords: The factory defaults for these
names/passwords are:
o
Admin comtech/comtech
o
Read/Write opcenter/1234
o
Read Only monitor/1234
Note that the Name and Password fields can each accept any alphanumeric combination with
a maximum length of 10 characters.
•
SMTP Server: Specify the mail server IP address from where you want to send the e-mail.
•
SMTP Domain / Destination Name: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the ‘Home | Support’ Page
( Sect. 9.3.1.3 in this chapter) is to be used.
o
For SMTP Domain Name , specify the domain of the e-mail server (usually found to
the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination ,specify the e-mail recipient name (usually found to
the left of the @ symbol in an e-mail address).