Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 143 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Appendix B B–3 MN-LBC-4000
B.2 LBC-4000 Front Panel Operations
Chapter 6. FRONT PANEL OPERATION
See Chapter 6. FRONT PANEL OPERATION for front panel figures and details.
See Chapter 6. FRONT PANEL OPERATION , Section 6.3.3 for the initial CONFIG menu.
B.2.1 (CONFIG:) REDUND (Redundancy) Submenu
Redundancy:
Mode State FrcBkup
Use
the
[

][

] arrow
keys
to select Mode , State , or F up. Press [ENT] .
(CONFIG:) Redundancy

Mode
Redundancy:
Control Mode = Manual
Use the [

][

] arrow keys to select Manual or Auto. Press [ENT] .
Note that, if you attempt to access this menu and the Redundancy State is Disabled, you will
see this message:
Not Available In
Current Mode
CONFIG: Redundancy

State
Redundancy Mode:
Control State = Enable
Use the [

][

] arrow keys to select Disable or Enable . Press [ENT] .
CONFIG: Redundancy

FrcBkup
Config Manual Redundancy
Force Backup NO
To force the redundant unit into standby mode, use the [

][

] arrow keys to select YES or NO .
Press [ENT] .