Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 129 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Serial Interface Operation 8–19 MN-LBC-4000
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Remote Mode REM_ 1 bytes,
numeric,
0 or 1
Command or Query.
Use “REM” to set or return the active operating mode as Local or
Remote.
Set or return in the form REM_x where:
x=0 (Local Mode)
x=1 (Remote Mode)
Command Example:
<0001/REM_1{cr} (sets operation to Remote Mode)
REM_
REM_
REM_x
Retrieve
Equipment
Type
N/A
22 bytes,
alphanumeric
Query only.
Use “RET” without an argument to return the model number and
firmware version of the unit.
Query, when used without argument, returns a string in the form
RET_LBC-4000_VER:X.X.X where:
X.X.X=Firmware Version Number
Query Example:
<0001/RET_{cr}
>0001/RET_LBC-4000 VER:1.2.5{cr}{lf}
N/A
RET_ RET_
Retrieve
Module Type
N/A 12 bytes,
alphanumeric
Query only.
Use “RET” with an argument to return the operating frequency and
function (i.e., up/down) of the selected module.
Query, when used with argument y, where:
y=A (Conv A)
y=B (Conv B)
returns a string in the form RET_y_xxx_ZZ where:
xxx=Frequency of selected module (070 or 140)
ZZ=UL (Uplink)
ZZ=DL (Downlink)
Query Examples:
<0001/RET_A_{cr}
>0001/RET_A_140_DL{cr}{lf}
<0001/RET_B_{CR}
>0001/RET_B_070_UL{cr}{lf}
N/A
RET_y_
RET_y_x...Z