Comtech EF Data CDM-625A, Инструкция по установке и эксплуатации

Страница: 507 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 4
10–37
10.4.2 Web Page Descriptions
10.4.2.1 Configuration | BUC (Block Up Converter) Page
When a Block Up Converter (BUC) is available, use this page to configure its operating settings
and to view the BUC status for L-Band operation
.
Figure 10-5. Configuration | BUC page
BUC Configuration
•
BUC Power Enable , 10 MHz Ref Enable , and Output Power Enable – Use the drop-down
lists to turn these functions ON or OFF .
• BUC Low
and
High Current Limit
– Assign a value (in mA) ranging from
0
to
4000
.
•
Tx LO (Low Oscillator) Frequency – Assign a value (in MHz) to the Tx LO Frequency, and then
use the drop-down list to designate the value as a HIGH (+) or LOW (-) limit.
•
BUC Address – Assign a value for the BUC Address from 1 to 15 .
Click [Submit BUC Controls] to save the setting changes made in this section.
BUC Status
This section refreshes automatically every ten seconds. These status settings are read-only and
cannot be changed.