Computec CDD6 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 74

Computec CDD6 Скачать руководство пользователя страница 72

Computec

CDD6

EN

CDD6: user manual – rev.07

Page 72/74

8.4

Installation personnel Requirements

The installation of the CDD6 system must be executed exclusively by competent and qualified technical
personnel, having all the technical and professional requirements provided by the current active legislation
in the installation country.

The installer MUST check the conformity and compatibility of the doors to be driven with the CDD6 system,
especially the door system must be compliant to the standards and codes also related to the safety of use.

The installer MUST execute all the system installation and commissioning operations, and operate when
present power supply voltage coming from electric cabinets and/or branch boxes, and he has to be enabled
to perform all the electrical and mechanical operations.

The installer MUST provide to the final customer all the information about the system behaviour, in normal
or inspection mode.

The installer is the only responsible subject of any wrong installation, or of any non-compliance to the
instructions reported in the present manual. The installer is responsible towards the customer or others
about any damage to people, things, animals that are caused by wrong installation of the system.

8.5

User requirements

The user must be aware of all the necessary information reported in the present document.

8.6

Standard and codes reference

The CDD6 product is compliant to the following directives:

-

2006/42/CE Machine

-

2014/35/CEE Markings

-

86/188/CEE acoustic emission, modified according to 98/24/CEE

-

2014/30/UE electromagnetic compatibility

And according to the following particular codes:

-

EN12015/EN12016

-

EN13015

-

EN81-1 EN81-2 (1)

-

EN81-20/50 (1)

-

AS1735 (1)

(1): compliance evaluated when coupled to the motors reported in the table “- Table 2: compatible motors
data”.

The certified copy of the declaration of conformity for the product is reported in paragraph 9.1.

«
...
70
71
72
73
74
»

Содержание CDD6











































































Отзывы:

Нет отзывов