Computec CDD6 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 74

Computec CDD6 Скачать руководство пользователя страница 6

Computec

CDD6

EN

CDD6: user manual – rev.07

Page 6/74

Introduction

The present user manual contains all the necessary information for a safe and correct installation,
configuration, use and maintenance of the lift door controller CDD6.

Before proceeding with the installation of the CDD6, it is necessary and strongly recommended that the
installation personnel have read and understood all the parts described in the present manual.

a non-correct installation of the system may cause serious danger and/or injury.

The present user manual is in any case integral part of the CDD6 device, and it must be included to the
installation documentation.

All the references to the safety and responsibility are reported in the chapter 8 “General information”.

The present manual contains detailed information related to the firmware version 01.00.000, regarding all
descriptions about functional implementation.

NOTE: all the pictures, images, schematics reported in this manual have purely example purpose: the
components of the lift system may result different, based on the installed motor and door operator.

«
...
4
5
6
7
8
...
»

Содержание CDD6











































































Отзывы:

Нет отзывов