CompuSTAR Firstech CM800-S, Руководство по установке

Страница: 8 / 21

8
time. This should be set at the time of installation.
IMPORTANT:
The vehicle’s key must be inserted into the ignition and turned to the “on” position prior to
driving your vehicle. If the foot brake is depressed prior to the key inserted and
in the “on” position, the
vehicle will shut off.
Diesel Timer
The CM800-S
module has a built in Diesel Timer to allow the vehicle’s glow plug wire to heat up. There
are two time settings on this unit, 7 or 18 seconds. This will allow the ignition to power up and then crank
once the time has expired and glow plugs have properly heated up.
CM800-S Firmware
The CM800-S control module is firmware updatable through the internet. In the event Firstech makes
any changes or corrections you can update the module using the RS232 port on the control module. This
feature is a detailed process so please follow instructions on
www.compustar.com .