Comprehensive CHE-HDBTWP242K, Руководство пользователя, Страница: 8 / 17

6
Transmission Distance
Note:
Straight-through category cable wired to T568B standard is
recommended.
Panel Description
Transmitter
ID Name Description
1&2 HDMI IN (1~2) Connect to HDMI sources.
3 USB-C
USB-C port: USB 3.1 Gen1 (5Gbps). Connect to a USB-C
source for source input or connect to a control device for
firmware upgrade.
4 RESET
Use this button to reset device.
When the transmitter is powered on, use a pointed stylus to
hold down this button for five or more seconds and then
release, the transmitter will reboot and restore to its factory
defaults.
5 UPDATE
Micro USB port for updating firmware (MCU and USB-C
chip) or controlling the transmitter through API commands.
6
Input Selection
LEDs

LED On: Corresponding input channel is selected.

LED Off: Corresponding input channel is not selected.
Cable Type Range Supported Video
Cat 5e
100m/330ft 1080P@60Hz, 36bpp
90m/197ft
1080P@60Hz, 48bpp
4K@30Hz, 4:4:4 24bpp
4K@60Hz, 4:2:0 24bpp
Cat 6/6a/7 100m/330ft
1
2
3
5
4
6 7 8 9
10 1
12
13