Competition 100HPCA-E, Руководство пользователя

Страница: 23 / 24

Bomba de calor eléctrica de bajo consumo _50 Heat pump pool heater _21
CARACTERÍSTICAS DE LA BOMBA DE CALOR
TEMPERATURE CONTROLLER PROGRAMMING
Warning: Do no modify the parameters of the temperature control programming without valuable reason.
To access the temperature controller programming mode, you must simultaneously press and hold the and but-
tons for five (5) seconds. The indicator will then light up and the ‘’F0~F7’’ code will be displayed.
To select a function (F0~F7), you must press on the or buttons.
Once the function is selected, you must press the button to modify the default value.
To modify the default value, press the or buttons.
Once the default value is modified, press the button to return to the previous step in order to select another function
(F0~F7).
To exit the temperature programming mode, press and hold the button for a few seconds.
See the chart below for a description of all functions.
Warning :
The modification of the default values can affect the proper functioning of the heat pump. The default values must not, in
any case be modified without authorization of your dealer.
FUNCTION
Return difference
Compressor delay time
Minimum adjustment of the water
temperature
Maximum adjustment of the water
temperature
Mode
Sensor calibration
Start defrost setting value
End defrost setting value
SETTING RANGE
1~15°C (1,8~27°F)
0~9 minutes
10~30 °C (50~86 °F)
30~43 °C (86 ~110 °F)
1: Refrigeration 2: Heating 3: Alarm
-5~5°C (-9±9°F)
-10~0°C (14~32°F)
0~10°C (32~50°F)
CODE
F0
F1
F2
F3
F4
F5
F6
F7
DEFAULT VALUE
1°C (34°F)
5 minutes
16°C (61°F)
35°C (95°F)
2
0
-7°C (20°F)
4°C (39°F)