Compaq ProLiant DL580 Скачать руководство пользователя страница 146

Страница: 146 / 222

Server Configuration and Utilities

7-23

Compaq Confidential – Need to Know Required

Writer:

Cynthia Dresden

Project:

Compaq ProLiant DL580 Server Setup and Installation Guide

Comments:

Part Number:

159213-003

File Name:

h-ch7 Server Configuration and Utilities.doc

Last Saved On:

4/5/01 2:48 PM

For more information on these drivers, run the

README.COM

file in the root

directory of the IBM OS/2 SSD from Compaq.

If you use SmartStart to install your operating system, these drivers install
automatically. Otherwise, you can use SmartStart to create an
IBM OS/2 Support Software Diskette (SSD) from Compaq to support a
manual installation of IBM OS/2.

If you do not want SmartStart to configure the server, follow this procedure:

Launch the SmartStart CD as previously described in this chapter.

Launch manual operating system configuration:

Select the System Configuration Utility.

Select the Operating System Installation option from the System
Configuration Utility main menu.

Follow the instructions provided for the operating system you are
installing.

Sun Solaris Intel Platform Edition Device
Drivers for Compaq

To operate with Sun Solaris Intel Platform Edition 2.6 and 7, your Compaq
ProLiant DL580 server must maintain certain device drivers.

You can access the drivers and installation procedures for Solaris 2.6 at the
Sun website:

www.soldc.sun.com/support/drivers/

For Solaris 7, the drivers are included with the operating system.

■

The

cnft

driver is required for the Texas Instruments TLAN-based

Compaq NICs.

■

The

iprb

driver is required for the Intel-based Compaq NICs. You can

access the Gigabit Ethernet NIC driver and installation procedures for
Solaris 2.6 and 7 at the Intel website:

www.support.intel.com/support/network/adapter/1000/

Содержание ProLiant DL580































































































































































































































Результаты поиска

Содержание ProLiant DL580

Отзывы:

Compaq ProLiant DL580, Руководство по установке и настройке, Страница: 146 / 222

Результаты поиска

Содержание ProLiant DL580

Отзывы: