"Compaq.com - Compaq Presario 1660 Model Maintenance and Service Guide -
United States June 27, 2004
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US |
SEARCH
Maintenance & Service Guide
Presario 1660 Model
|
|
|
Removal & Replacement Procedures
|
|
Preliminary Steps
, complete the following preliminary steps:
1. If a power-on password has been established, type the password and press the
Enter
key. If the password is not known,
2. Run
.
3. Turn off the computer and its external devices.
4. Disconnect any external devices that you do not want to test. Do not disconnect the
printer if you want to test it or use it to log error messages.
IMPORTANT:
If the problem only occurs when an external
device is connected to the computer, the problem
may be related to the external device or its cable.
Verify this by running POST with and without the
external device connected.
5. Install loopback plugs in the serial and parallel connectors if you would like to test
these ports.
6. Ensure the hard drive is installed in the computer.
7. Ensure that the battery pack is inserted in the computer and the computer is
connected to an external AC power source.
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20che...d%20ok/NOTEBOOKS/PRESARIO%201660/trbprlm.html (1 of 2)6/27/2004 3:00:31 AM