Compaq Deskpro 1000 Series of Personal Computers
5-15
To install a processor, complete the following steps:
1. Lower the processor into the ZIF socket ensuring that pin 1 on the processor lines up with pin 1
on the ZIF socket.
2. Push the handle on the ZIF socket back into place to secure the processor.
3. Replace the heat sink and heat sink retaining clip.
✎
Ensure that the new thermal pad
3
(included in the spares kit) is in place before
installing the heat sink.
4. Replace the system unit cover.
5. Plug in the computer power cord.
6. Turn on the computer.
7. Run the CMOS Setup Utility. For information on how to run the utility, see Chapter 7,
“Utilities.”
