Compaq D315 - Desktop PC, Руководство по устранению неисправностей, Страница: 65 / 76

Troubleshooting Guide B–3
Password Security and Resetting CMOS
7. To re-enable the password features, repeat steps 1-4, then replace
the jumper on pins 1 and 2.
8. Repeat steps 5-6, then establish new passwords. See the
Computer Setup (F10) Utility Guide for Computer Setup
instructions.
✎
All passwords will be cleared.
Clearing and Resetting the CMOS
The computer’s configuration memory (CMOS) stores password
information and information about the computer’s configuration. To
reset CMOS to the factory default settings first set time and date, you
must first access the
Computer Setup Utilities menu.
1. When the Computer Setup message appears in the lower-right
corner of the screen, press the
F10
key.
✎
If you do not press the
F10
key while the message is displayed, you
must reboot the computer to access the utility.
2. Press the
Enter
key to select English. A choice of four headings
appears in the Computer Setup Utilities menu: File, Storage,
Security, and Advanced.
3. Use the arrow keys or the
Tab
key to select File > Set Defaults
and Exit. This resets the soft settings that include boot sequence
order and other factory settings. It will not, however, force
hardware rediscovery.
4. Press the
Enter
key.
5. Press the
F10
key to confirm the reset or the
Esc
key to cancel the
reset.
See the Desktop Management Guide for further instructions on
reestablishing passwords. For instructions on Computer Setup, see the
Computer Setup (F10) Utility Guide.
292974-002.book Page 3 Tuesday, July 9, 2002 5:46 PM