Compaq D315 - Desktop PC, Руководство по устранению неисправностей

Страница: 55 / 76

Troubleshooting Guide A–9
Post Error Messages
914-Hood Lock
Coil is not
Connected None Smart Cover Lock
mechanism is missing
or not connected. 1. Reconnect or replace
hood locking mechanism.
2. Reseat or replace hood
locking mechanism cable.
916-Thermal
Sensor from
Processor
Heatsink is not
Connected None Processor heatsink
cable not connected to
system board. Reseat or replace the
processor heatsink cable
going to the system board.
917-Expansion
Riser not
Detected None Riser board not seated
or not installed. Install riser board if missing or
remove and reseat to ensure
good connection.
1151-Serial Port
1 Address
Conflict Detected 2S* Both external and
internal serial ports are
assigned to COM1. 1. Remove any serial port
expansion cards.
2. Clear CMOS. (See
Appendix B, “Password
Security and Resetting
CMOS.”)
3. Reconfigure card
resources and/or run
Computer Setup or
Windows utilities.
1152-Serial
Port 2 Address
Conflict Detected 2S* Both external and
internal serial ports are
assigned to COM2. 1. Remove any serial port
expansion cards.
2. Clear CMOS. (See
Appendix B, “Password
Security and Resetting
CMOS.”)
3. Reconfigure card
resources and/or run
Computer Setup or
Windows utilities.
*L = Long, S = Short
Numeric Codes and Text Messages (Continued)
Code/Message Beeps Probable Cause Recommended Action
292974-002.book Page 9 Tuesday, July 9, 2002 5:46 PM