manualshive.com logo in svg

Compaq Compaq PW5100, Справочное руководство, Страница: 103 / 219

Поделиться
Скачать
Compaq Compaq PW5100 Скачать руководство пользователя страница 103

7-13

Compaq Professional Workstation 5100 Reference Guide

Writer: Erica T Blakeney   Project: Compaq Professional Workstation 5100 Reference Guide   Comments: 299348-003

File Name: H-CH07.DOC   Last Saved On: 3/12/98 11:50 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Removing the Expansion Board Cage

The removable expansion board cage allows quick removal of expansion
boards, without disconnecting the cables attached to the connectors on the
boards, and without the use of tools. With the expansion board cage removed
from the chassis, you can easily access the system board.

To remove the expansion board cage:

1.  Turn off the workstation and any external devices.

2.  Disconnect the power cord from the electrical outlet.

3.  Remove the workstation cover.

CAUTION:

     The power supply in the Compaq Professional

Workstation 5100 contains an auxiliary power section. Make sure
the  power switch is off and the unit is unplugged before removing
the I/O bracket assembly in the following step.

4.  Grasp the expansion board cage firmly with both hands, one hand on

back and one hand on front, then pull up and out to remove it from the
chassis.

Figure 7-9.     Removing the expansion board cage

Содержание Compaq PW5100




























































































































































































































Отзывы:

Нет отзывов